BMW Scanner 1.4.0 v is a scan tool for BMW cars which can read code and save code in the files, copy ZCS and FA code,read and serach VIN odometer value and DTCS, etc.BMW scanner 1.4.0 can work good on BMW old cars. BMW Scanner 1.4.0 Will Work on the Follow OBDI & OBDII BMW Models. 1992 - 1999 E36: 3-Series 1999 - 2006 E46: 3-Series.
BMW Scanner V1.4.0 is the update version of BMW Scanner. The required operating system is Windows XP. But I have hooked it up successfully on Dell 360 Windows 7 64 bit system. Following are my attempts, you can have a try. Path of diablo guides.
1) First of all, install BMW scanner software
2) Plug the BMW scanner interface to your vehicle’s OBD2 socket after complete software installation, but do not connect it with your PC/laptop at this time
- BMW SCANNER 1.4.0 is a tool for BMW scanning and diagnosing vehicles. And BMW scanner 1.4.0 can perform IKE / LCM / EWS. BMW Scanner 1.4.0 v is a scan tool for BMW cars which can read code and save code in the files. Copy ZCS and FA code, read and serach VIN odometer value and DTCS, etc. BMW scanner 1.4.0 can work good on BMW old cars.
- 1.4.0 for bmw diagnostic code reader scanner programmer + pa soft never-locking software Regular price $ 99 95 $ 99.95 11 BUTTON ON BOARD COMPUTER (OBC) CLOCK BMW E36 318 325 328 M3 6.
- BMW Scanner V1.4.0 is the update version of BMW Scanner. The required operating system is Windows XP. But I have hooked it up successfully on Dell 360 Windows 7 64 bit system. Following are my attempts, you can have a try.
- But for Win7 64-bit, you need to download the latest driver from www.ftdichip.com. BMW scanner 1.4.0 USB driver on Win 7 32-bit instruction: 1) Remember where the folder/the program is installed. This will help to tell Win 7 O/S to locate the USB driver. For example: I: 3 in 1 bmwscan140a bmw 140 driver.
3) Wait several seconds and plug the interface to the computer USB port
4) Download FTDI driver on the http://www.ftdichip.com/Drivers/D2XX.htm web site. It is not difficult to perform according to the window instructions.
5) A black DOS message will show up and then install the driver after downloaded it on your computer.
6) Go back to the main program, find out device manager and click BMW Scanner to select driver software you want to update.
7) Select “Browse my computer for driver software”>> “Universal serial bus controllers”>> “FTDI driver” >> “USB Serial Converter”, then accept window prompt to go on operation www.eobdtool.co.uk.
Bmw Scanner 1.4 0 Driver Download
8) Install the FTDI driver
9) Wait some seconds until the BMW scanner detects the software. Run software and select your options after successful install driver
Warm Prompt: You can download a secure program from Windows XP Mode, Virtual PC and Microsoft before operating.
Related Post:
I keep seeing people requesting information on how to install BMW Scanner 1.4.0 on Windows 10. Here are the notes I took whilst I installed the software on Windows 10 Professional. The software installation was done on a fresh install of Windows 10 Professional. I first copied the scanner software from the CD to a folder on my desktop.
These instructions should also work for Windows 7 but I have not tried them on this Operating System. How to fceux for mac.
Disclaimer: This procedure worked for my installation. It is not guaranteed to work for all laptops and all versions of Windows.
1. Double-click on the set up program in the software folder.
2. When asked if you want to allow this software from an unknown publisher to update the computer. click the Yes button. The installation will start.
3. Take all the default options for the installation. If asked if you want to overwrite and files, click on Overwrite All. When prompted, take the option to install a shortcut on the desktop, and to auto-run the application after installation.
Pa Soft 1.4 Windows 10
When the application starts you will see that the drivers are not installed.
4. Now we need to install the drivers.
Go to the install folder on the c: drive.
Go in to BMWScan140.
Go in to Drivers.
Select the file FTD2XX.inf (the one that says setup information) and right-click the mouse to bring up the context menu.
Press Install.
When asked if you want to allow the program to modify the computer. Press Yes. The drivers will start to install.
During the installation you will be notified that the system cannot verify the publisher.
Download directx 9.0 windows 10. Press on Install this driver software anyway
5. The drivers are installed and the software now shows the drivers installed when you run it
6. Plug the laptop in to the car and start the software. The software should connect to the car and allow you to scan and update the system.
The items noted below I did not need to do for my installation of Windows 10 Professional but are included to give you some pointers for troubleshooting.
- On a previous installation of Windows 10 I needed to find a registry hack to allow uncertified drivers to be installed. This was a while ago so I don’t have the link. Try searching for “how to install drivers from an unknown publisher”. (always take care when editing the registry)
- On 64-bit installations you may find you need to install the 64-bit drivers. The drivers are available in the install folder where you run the initial setup program from.
Go in to the 64 bit drivers folder, locate the Setup Information files, right-click on these and choose the Install option from the menu.
- You may also find you need to change the configuration for the COM serial port. You can do this in Device Manager, look for the serial port driver and use the configure options. You can change the assigned COM port and other things like the latency. NOTE: You won’t see the serial port in Device Manager unless the laptop is plugged in to the car.
I hope that this post helps you to get the software working. Please do let me know if this gets you going. If you have issues, try Googling (that’s what I do) or you can post a comment and I will try and help. I can’t give any guarantees to be able to get things working for you but can sometimes help to communicate
UPDATE 2018-05-06
My laptop updated to the latest feature version of Windows today and after this update BMW Scanner could no longer see the serial port to communicate with the car. It would just say Hardware not ready. A quick look in Device Manager in Windows and it said that the driver for the BMW Scanner was not loaded. I went back to load the drivers as per the above instructions but they would not install. Windows gave an error about there not being a signature on the drivers and so would not install them. A quick Google of the issue and I found the following link.
I used the notes on GUI to Disable Digital Signature Checking. After disabling the check for the digital signature it now allowed the drivers to be installed. I had to reboot the laptop after the install of the drivers before they would work.